Description

This listing is for a premade 1:64 or 1:48 scale wooden bridge. The bridge is meant for use in western trail class setups and meets the requirements for the AHQA SHW467.4 Ride over wooden bridge.

(It’s too tall in both scales for the 4H rules which have a max height of 8 inches.)

Also included is a faux-blue tarp that fits into the bridge when flipped over, allowing it to be used as a water hazard. The tarp can also be used by itself, as it’s quite sturdy.

I have all of the Maggie Bennett Monthly Micros so if you would like a photo with a different model, just let me know!

Product Info

The bridge is made of basswood and has been sanded, assembled with wood glue, stained, and weathered/worn. It was coated with matte varnish so you can wipe it with a damp cloth, but you can’t soak it in water.

The blue tarp is a piece of paper that has been carefully shaped and then coated in wood glue, acrylic paint, and multiple coats of matte and gloss sealer. The silver grommets are painted on, they are not useable.

It is water-resistant but not long-term water-proof. You can fill it with a tiny amount of water for a live show or photoshoot, but if you let it sit for several hours it will likely get damaged.

It’s relatively sturdy, so it should hold up to basic wear and tear, but is not intended for young children. This is meant for adults (or young adults) who are using it for careful play, display, Photo Show, or Live Show setups.

Sizing

The bridge is 1 3/4 inches long, 3/4 wide, and 3/16 inches tall. The planks and framing boards are both 1/8 x 1/16.

For 1:64 (Breyer Mini Whinnies, Artist Resin Micro Minis, S scale) this would be 9 feet and 4 inches long, 4 feet wide, and 1 foot tall, with 8 inch boards.

For 1:48 (Large Micro Minis, O scale) this would be 7 feet long, 3 feet wide, and 9 inches tall, with 6 inch boards.

To see if this bridge will work with your model, it can be helpful to assemble a paper version and see how it looks. I do take custom orders, so if you need a fence that’s larger or smaller, please drop me a line at custom_orders@Martha.net.